Aluminium windows and doors Warranty

Subject to the conditions and limitations listed under “General Conditions” below, The Build Store (TBS) Windows and Doors:

(a) guarantees that its products are of acceptable quality and free of any defect caused by the manufacturer; and

(b) warrants its products against defects arising from faulty workmanship or materials, for a period of seven (7) years from the date of delivery TBS Windows and Doors. (the “Warranty”).

The Warranty is subject to the following conditions and limitations:

1.1  The product has been installed in accordance with the relevant Australian Standards and best building practice.

1.2  The product has been installed and maintained in accordance with TBS Windows and Doors installation and care and maintenance recommendations.

1.3  The product has not been subject to misuse, abuse or neglect.

1.4  Damage has not been caused by accident, transport, installation or any external cause.

1.5  The Warranty is void if the purchaser has provided incorrect measurements or specifications.

1.6  In respect of insect and safety screen products, the Warranty is void and will not apply if:

1. The product has not been fabricated by a member of our suppliers.
2. The product has not been fitted by TBS Windows and Doors personnel or nominated installers.

1.7  Manufacturing standards and tolerances are not deemed defects, nor are industry variations in colour of aluminium componentry.

1.8  Wire reinforced glass, toughened glass, float glass, laminated glass and mirror glass have the benefit of the Warranty for one (1) year only.

1.9  TBS Windows and Doors accepts no responsibility for glass breakage (except for faulty workmanship or material).

2.0  TBS Windows and Doors accepts no responsibility if damage occurs to product when it is kept in storage by TBS Windows and Doors beyond the original delivery date at the request of the customer.

2.1  Moving parts such as winders, hinges, jamb liner system, counter balance system, sash locks, handles and other moving parts/all other door parts are covered for a period of one (1) year only.

2.2  The Warranty does not apply to parts supplied by other manufacturers as separate components, and where such a component is warranted or guaranteed by its manufacturer or supplier, those guarantees or warranties, whether express or implied, are assigned to the person to whom the goods are supplied.

2.3 The Warranty is limited to the repair or replacement of the faulty product TBS Windows and Doors’ discretion but does not extend to the installation or refurnishing of a replacement product or any other consequential or indirect loss or damage incurred as a result of the defect. No claims can be made against any member of TBS Windows and Doors in respect of such matters.

2.4  Only repairs carried out by TBS Windows and Doors personnel or authorised TBS Windows and Doors agents are covered by the Warranty.

2.5  For Doors in particular:

1. a) When fitting doors, the structural strength must not be impaired when fitting or applying hardware or cutting or altering the door for lights, louvres, panels or any other special features.
2. b) All solid doors must be hinged with 3 appropriately sized hinges and not more than 3mm may be trimmed from any edge.
3. c) The Warranty does not cover glass doors that are wider than 1020mm or higher than 2635mm, sliding door panels wider than 1500mm or higher than 2330mm; or doors that are improperly hung or which do not swing freely.

The Warranty is provided in addition to any warranty or guarantee imposed by law which cannot be excluded and, in particular, the guarantees implied by the Competition and Consumer Act 2010. In no way does this guarantee seek to exclude or limit any right or remedy you have in law which cannot be excluded. However, to the extent that is permitted by law, any other warranties or guarantees are excluded.

2.1 Claims under the Warranty require the claimant to first notify TBS Windows and Doors. No claim by the customer, whether for alleged damage or defective goods or any other cause whatsoever, need be recognized by TBS Windows and Doors (and all such claims shall be deemed absolutely waived by the customer) unless notified in writing and received within one month (30 days) of the defect arising or being identified in the product.

2.2 Claims under the Warranty can only be made by the purchaser of the product. Copies of documentation showing the purchase date of the product should be included with the written claim and forwarded to TBS Windows and Doors (ADD:                                                                                          ). Any costs associated with lodging a claim under the Warranty will be borne by the claimant.

2.3 Where a product has been repaired or replaced, the Warranty shall apply to the repaired or replaced product for the balance of the period provided by the Warranty.

To keep your windows and doors looking and functioning at their best, TBS recommend you maintain them regularly. To maintain optimum aesthetic and performance, follow these simple maintenance and care tips.

3.1 All Aluminium Windows and Doors

1. a) External aluminium surfaces of windows and doors should be washed with clean water and a mild detergent at least every three months. A soft sponge or similar should be used to avoid scratching the glass or aluminium.
2. b) In coastal or industrial areas where the environmental conditions are more demanding, the cleaning program should be carried out on a monthly basis.
3. c) Abrasive, chemical cleaners or steel wool should not be used as such methods may result in damage to the glass or aluminium surfaces.
4. d) Drainage slots should be checked on a regular basis to ensure they have not become blocked with residual dirt or grime.

3.2 Awning/Casement Windows and French Doors

1. a) With sashes open, the sash and opening perimeter should be cleaned regularly and kept clear of dust and foreign matter.
2. b) All door and window operating hardware should be cleaned and operated regularly to ensure smooth operation.
3. c) Lubricants should not be used on casement stays, as this will affect their operation.

3.3 Sliding Windows and Sliding Doors

1. a) Sill recesses should be regularly cleaned and kept clear of dust and foreign matter.
2. b) A brush and vacuum within the track area may be used to do this.
3. c) Door locks should be checked from time to time for satisfactory operation and may require adjustment to compensate for building settlement.
4. d) Door rollers are factory set and should not require any adjustment. However, if, due to building settlement, an adjustment needs to be made, the door panel must first be lifted to relieve weight from the roller assembly. Adjustment should be made using a Phillips head screwdriver.

3.4 Double Hung Windows

1. a) Window jamb tracks should be cleaned regularly and kept clear of dust and foreign matter.
2. b) Window operating hardware should be cleaned and operated regularly to ensure smooth operation.

3.5 Hardware

1. a) Regular maintenance is required for all hardware, even stainless steel, as they are moving parts. In most environments, maintenance is recommended every six (6) months and every three (3) months in marine and industrial environments.
2. b) Hangers, pivots and brackets should be given a light spray of corrosion preventative (such as CRC Marine 66, Innox or WD40) followed by a light wipe with a dry cloth to remove excess.
3. c) Exposed surfaces should be wiped down with warm soapy water and a soft rag and then rinsed clean before applying preventative.
4. d) Visible surfaces of hinges should be wiped down with warm soapy water on a soft rag and then rinsed off by wiping with a clean damp rag.
5. e) Application of a thin film of light machine oil or one of the corrosion preventative sprays mentioned above will help to maintain the original lustre of the metal finish. Be careful not to get these compounds on the profile itself as they may cause staining.
6. f) Drop bolts should be sprayed with a lubricant such as those mentioned above and the sliding pin inside the bolt and to the lock cylinder.

3.6 Glass

1. a) It is recommended that all glass surfaces be kept clean by prompt removal of all dirt or other contaminants. Clean water and, in some instances, a small amount of mild detergent should be used.
2. b) After washing, any detergent residue must be thoroughly rinsed away with clean water.
3. c) Under no circumstances is any form of blade, scraper or abrasive cleaner to be used.
4. d) Stubborn dirt or residue should be lightly sponged off to avoid scratching of the glass.
5. e) The frequency of cleaning required will depend on environmental conditions such as proximity to the ocean or industrial areas. As a general guide, glass should be cleaned at least quarterly.

3.7 Insect and Safety Screens

1. a) Flyscreens can be cleaned by vacuuming or washing thoroughly using a soft brush.
2. b) Screens should be cleaned at least three to four times per year.
3. c) A small amount of detergent can be added to a bucket of warm water.
4. d) Carefully remove the screen before hosing it down thoroughly.
5. e) A soft nylon brush can be used to dip into the warm water and detergent, gently brushing the screen.
6. f) Ensure to hose down well afterwards and allow the screen to dry before replacing in the window or door.